• Stand Decor

    Today we will decorate a beautiful stand for a bottle of wine (or champagne). The product can also be used as a candy. You can purchase a blank (sled from MDF) in specialized handicraft stores. On the Internet, there are also similar accessories for hand-made. So, besides the sleds, we will need: - 2 m of silver ribbon, width - 13 mm; - acrylic pearl paint and a piece of sponge; - 2 m of blue satin ribbon, width - 9 mm; - rhinestones of blue color, diameter - 6 mm; - 1 m of white lace, width - 2 cm; - 10 pieces of snowflakes, each diameter is 2 cm; - 2 beautiful openwork beads, diameter - 1.5 cm; - good transparent glue (Moment-Gel will do); - 1 m wide blue translucent tape, width - 7 cm. Dimensions required materials are given conditionally, you can pick up original ribbons and rhinestones, if you want. The main thing is to show imagination. This is how the preparation of a stand for a bottle of wine (sledge from MDF) looks like:
     Decor stand for a bottle of wine
    Approximate product length - 30 cm, width - 12 cm,and the height is 14 cm. First of all we coat the sled with acrylic paint using a regular sponge. As soon as the first layer dries out, immediately apply the second one. So the color will be richer. It is possible to prime the workpiece before painting, but I decided to do without it.
     workpiece stand
    Cut off two strips of silver tape, approximately along the length of the sled. It is best to attach the tape to the workpiece to determine the exact size of the segment. The tips of the strips can be slightly melted with a lighter, so they will look neater. We glue the ribbons to the workpiece, as in the photo.
     Cut off two strips of silver tape
    Use the same method to determine the length of a fragment of blue ribbon. We glue this strip at the junction of two silver segments.
     fragment of blue ribbon
    Now we will fix the sparkles. We drop a drop of glue, we put a snowflake. A drop of glue "peeps through" through a hole in a snowflake. Above we press blue strazik.
     press the blue strasik
    In order to evenly glue the snowflakes, you first need to map out the locations of their fastening with a ruler. And we repeat it five times.
     evenly glue snowflakes
    Now start creating a bow for our stand for a bottle of wine. Cut two strips of the widest ribbon, about 20 cm. Two of them will be bows that will be attached to the sides of the sled.  proceed to the creation of the bow
    Fold the fragment in half so that the ends of the tape dock in the middle. And we sew the “forward needle” seam.
     Fold the fragment
    We tighten the seam. We should get a bow. We cut off about 18 cm of lace, sew a “forward needle” along one edge and sew it together. Here's the result:
    We tighten the seam
    Now back to the silver ribbon. Cut off three fragments of 20 cm.We fold each of them in half, and fasten together with a needle and thread.
     Cut three fragments
    All three fragments are sewn into a bow. Similar elements of the decoration are made of two segments of the blue ribbon 15 cm long, and then also 8 cm each.
     We sew all three fragments
    Next stage - the final bow. Sew all the elements into a single beautiful decoration. We fasten an openwork bead from above.
     final bow
    Bant we paste to the sledges. And now we repeat all the steps again, only for the other side of the product. You can use the finished stand as a candy to keep sweet treats.
     Stand Decor
    And here is an example of the direct use of sleds as a stand for a bottle of wine (or champagne).
     Decor for a bottle of wine

    Related news


    How to choose the right chignon
    Diagnostics and repair of boiler pressure switch
    How to restore contacts in the phone
    How to return the love of husband and wife
    Glazing of loggias and balconies
    Horoscope for the week from 2 to 8 October 2017