• Secret cache in the book

    I already wanted to make a really cool cache for storing valuables. In which there was a wooden insert with LED lighting, which would be included when you open the book. I have always loved the idea of ​​secret hiding places and secrets, and therefore decided such an unusual cache in the book.
    The secret cache in the book

    The squeak of a suitable book

    The first thing I did was visit a nearby bookstore in which I found this interesting book. Interesting, of course, not in terms of text, but in the form of a future hiding place. She got all but five bucks. If you have the opportunity to find a similar book for free, then it will generally be just great for you.
    Secret cache in the bookThe secret cache in the book
    I will make a book on magnetic stickies using neodymium magnets. And for this you need to make a thickness margin for magnets from the first pages. For this, we glue the first page with glue type PVA. So that after gluing the pages do not become wavy and better glued, we place them under a small press.

    Gluing the pages of a book

    Now you need to glue the pages of the main part of the book. To do this, we apply all three sides with glue, and again put it under the press. Afterwards, I realized that I could not have done this, since I still had to drill the holes for the magnets and paste them in, which in turn would hold all the pages together.
    >img src="https://sdelaysam-svoimirukami.ru/uploads/posts/2017-09/1504613110_4.jpg" style="max-width: 100%;" alt="Secret cache in the book"> Secret cache in the bookSecret cache in the bookSecret cache in the bookSecret cache in the bookSecret cache in the bookSecret cache in the book

    Removing the inside

    It's time to determine the size of the internal cell of the cache, and finally make this slit and remove unnecessary paper. br>The technology is as follows: Take a piece of MDF, draw on it the size of our cache cell. We attach the piece to the book and press it tightly. And drill in the corners of MDF with a book.Before drilling, it is necessary to measure the thickness of a piece of MDF and the thickness of a book, subtract 0.5-1 cm. At the distance we make the limiter on the drill, so as not to drill through the book. Remove the board, using a ruler and a pencil, connect the holes on the book. We take a sharp stationery knife and start slowly to cut pieces of paper. Be careful when working with a sharp knife.
    Secret cache in the bookSecret cache in the bookSecret cache in the bookThe secret cache in the bookSecret cache in the bookSecret cache in the bookSecret cache in the book

    Wooden insert

    In the size of the resulting indentation, we make the parts of the wooden insert. Smear abundantly with glue and glue into the recess. Use the materials at hand as struts.
    Secret cache in the bookSecret cache in the bookThe secret cache in the book

    Making a box with backlight

    LED backlight requires an additional section in the cache. I will glue it the same from this wood as the main box. Drill a hole for the LED. We form a box for the mechanism of turning on the LED.
    Secret cache in the bookSecret cache in the bookSecret cache in the bookSecret cache in the bookSecret cache in the bookSecret cache in the book

    Magnetic clasp

    In order for the book to close securely, I decided to modify it with magnetic clasps. To do this, drill holes, four in the lid and four in the main part. I advise you to pre-mark the same on both sides, so that when you close the book, the openings are opposite each other, and, consequently, in the future, also magnets. Then, paste the magnets into the openings.

    Related news


    Where to go to study after grade 9 to become a psychologist in the future
    What is a guitar
    Are there any cooking schools in Moscow or region
    How to create a scheme
    7 phrases that should not be spoken after sex
    How to get a visa to Russia