How to make parallelepiped?
Watch the video
The learning process can be made much more effective and more interesting if you work not only with your mind, but also with your hands. To better understand what parallelepiped is, you need to make it a cardboard model. Learn how to make a parallelepiped using simple materials that are always at hand. For its manufacture will need:
- A3 format cardboard sheet,
- PVA glue,
So, consider the easiest way to make a rectangular parallelepiped.
Making a sheet layout
To do this, take a sheet of cardboard or paper, then a vertical line split it in half. This line will be needed to make it easier to control the correct construction of parts on the sheet. From the lower edge of the sheet, 4 cm should move back up and put off 6 cm left and right of the vertical axis. Now you need to connect these points with a vertical line. It should run parallel to the base of the sheet. Now from each edge of the segment should be postponed by 8 cm, and then draw the upper edge of the parallelogram. Now it is necessary to repeat this operation three more times.So there should be four parallelograms that will be interconnected. Then, from the very top, which is the last, should be put aside 1.5 cm. Up. Thus, the valve will turn out. With it, it will be necessary to connect adjacent sides with each other.
If you do not know how to make a parallelepiped out of paper and are afraid to make a mistake in its manufacture, be sure to note that one of the main roles is played by clearly dimensioned dimensions. Therefore, give it the necessary attention. Especially you need to be careful in the final stages of the arrangement of sizes. In the last step of the drawing, before making a rectangular parallelepiped, it is necessary to draw square sides to the side faces of the parallelogram. Then to each of these sides will need to finish three more centimeter valves. Try to draw all the lines from the first time, so you don’t get lost in the wrong strokes.
We collect parallelepiped
Now begins the most interesting thing in the whole process of creating a geometric figure - its assembly. To do this, cut the resulting workpiece parallelogram.Then you should bend it along each line. For greater convenience, it is possible to preliminarily press the handle on the inner side of them with pressure, due to this, the bends will be smoother. After that, you need to lubricate the valves with glue, fill them inside the shape and glue them firmly in the right places. Now you know how to make a parallelepiped from cardboard or paper at home. As you can see, this is nothing complicated!
To make the process of creating a model clearer, you should study how to make a parallelepiped:
Also, for greater clarity, you can create a computer scan of the parallelepiped. You can see how to make a box on the video below.
How to make makeup in Photoshop (Photoshop)
What foods increase hemoglobin
How to find a girl
How to choose a hotel
Stylish beads on a chain
What are haircuts for thin hair
What do the colors symbolize?