• How to make a power regulator for household appliances

    Such a simple controller can be assembled by everyone. Knowledge of electronics is not required, since a ready-made Chinese module will be used, which can be purchased for a very small amount. At the same time, the regulator is able to regulate the power of devices up to 2000 W. It is possible to apply the regulator to adjust the power of any electric heaters, various engines, power tools, etc.

    It will be needed

    Making a power regulator

    Disassemble the junction box by removing the top cover.
    How to make a power regulator for household appliances
    Take the outlet and also disassemble.
    How to make a power regulator for household appliances
    Unscrew the side brackets so that they do not hang out. They are no longer useful. You don’t need to do anything else with the socket.
    How to make a power regulator for household appliances
    In the lid of the junction box we drill a hole for the socket.
    How to make a power regulator for household appliances
    Install the outlet in this socket and fix it with screws.
    How to make a power regulator for household appliances
    From the side in the box with a step drill, make a hole for the wire bushing.
    How to make a power regulator for household appliances
    Insert the sleeve and fasten with plastic nuts on both sides, complete with the sleeve.
    How to make a power regulator for household appliances
    We pass the wire through it.
    How to make a power control for home appliances
    Now it's time to connect the module.It’s not difficult, here’s the scheme:
    Module connection
    To the screw terminals we connect the stripped wires of the mains wire. And also fasten a piece of wire to connect to the outlet.
    How to make a power regulator for household appliances
    Connect the wires to the sockets.
    How to make a power regulator for household appliances
    Using a step drill, drill a hole on the other side of the box for the variable resistor of the module board. It will also hold the entire board in the case. Insert the variable resistor into the hole, fix it with a nut.
    How to make a power regulator for household appliances
    We put a handle on the shaft.
    How to make a power regulator for household appliances
    Close the lid of the box, collect the outlet.
    How to make a power regulator for household appliances
    Screw the sleeve, thereby fix the wire.
    How to make a power regulator for household appliances
    We screw up the four screws of the box.The regulator is ready on this.
    How to make a power regulator for household appliances

    Checking the operation of the regulator

    Turning on the network, connect a light bulb. Everything is regulated very smoothly, without any jumps and steps.
    How to make a power regulator for household appliances
    We try to connect a grinder.
    How to make a power regulator for household appliances
    How and where to use it, I think it will not be difficult to invent: electric stoves, heaters for water heaters, pump motors, etc. The thing is useful and necessary in everyday life. Friends, follow all safety requirements. Voltage that is present inside is life threatening.

    Related news


    What are mineral substances necessary for a dog?
    How to develop imagination
    Flower delivery: up-to-date and convenient service
    How to be invisible VKontakte
    IPad what is it
    Paper model of the Panzerkampfwagen VIII Maus
    Maple Leaf Application
    Spur: how to treat folk remedies