How to make a motorcycle from a lighter
What do you usually do with your lighter? Throw away? Do you know what can be made out of it ... a motorcycle ?! How? In our master class we will tell you how to make a motorcycle from a lighter with your own hands. This unusual craftwork can be given to friends, given to a child as a toy, or simply create your own unusual collection. Your future bike will be about 4 cm long.
What we need for work
- two plastic lighters
- Double-sided tape,
How to make a motorcycle from a cigarette lighter: instruction
- First you need to disassemble lighters. To do this, release the gas from them and carefully lay out all the details on the table so that none of them are lost.
- Look at the photo below. Here are the details that are now on your desk. We will need them for work. And so, let's see how these details are called. The first figure shows protection for the nozzle. On the second - the body, which is useful for the lever, wheel, spring and silicon.On the third - the nozzle lever. On the fourth nozzle itself. Next, the spring, the nozzle body, silicon, the eighth figure shows the wheel and the last is a porous filter.
- Let's start the assembly with the wheels of the motorcycle. After all, without them, he will not go anywhere. Insert into the grooves of the parts under the number two parts under the numbers 5, 7, 8. In the photo you can see all the part numbers, so as not to get confused.
- Now we collect the front part of the bike. A seat will be attached to it. We will make it from the lever of the nozzle. Insert the second part into the first blank. Connect the plastic case with the spring for silicon, the stone itself and the wheel.
- Wrap the nozzle with a double tape. Next, take two metal rods (in the photo this is the fourth part), wrap them with adhesive tape on all sides and put on the sixth part. Ultimately, you get the exhaust pipes. Secure them on your first billet.
- Did you do it? Now we make the helm of the future motorcycle. You need to take an awl, how to warm it up and make a hole in the second blank. Insert metal parts into it: parts numbered nine.
- It remains to connect the first and second blanks, in other words, the front and rear of the motorcycle.Secure them and secure with a light touch. Mini-bike can be assembled a little differently. We need to fuse two shells. The seat must also be heated and steamed. Insert the nozzle tightly into the housing above the rear wheel.
- Our motorcycle is ready. If you make this craft a child with whom he will play, it will not hurt to adorn the bike a little. Buy a motorcyclist (small pupsik) at the store and put him on a motorcycle. Also on the bike you can put mirrors, headlights and license plate.
8 practical ideas on how to equip a small apartment
How to be true
Fitness cake: lightness, taste and benefit
Shar Pei - original and faithful dog
Picture frame with decorative elements