To make a beautiful original decoration on your own hand is not very difficult. I offer a variant of your patent leather bracelet. Follow the description. Required materials: 1. two small pieces of patent leather - one white, one red; 2. waxed cord of red and white colors; 3. special rivets; 4. buckle;Among the tools we will need: - press to install rivets; - ruler;- scissors; - pen; - hole punch.If you don’t have a special press or punch, It's not a problem. For the formation of holes, use a regular awl or carefully cut through with nail scissors. Instead of a press, you can install riveting with a conventional hammer. So, let's start. The first thing you need to do is cut 10 pieces of leather. We need 3 pieces of red leather in the following sizes: 45x15mm - 1 piece, 10x35mm - 2 pieces.And 7 pieces of white in such sizes: 45x15mm - 1 piece, 10x35mm - 4 pieces, 100x7mm - 1 piece, 70x7mm - 1 piece.Take a piece of white leather measuring 70x7mm. At a distance of 25mm from the edge we make a small hole. We put on this hole on the buckle and fasten the remaining tail riveting. After that, with another riveting we attach the belt to the base of the bracelet. On the last piece we make 5 holes with a distance of 15 mm. And we also attach it to the base using riveting.
The next step is to make 8 small holes on the pieces with dimensions 45x15mm. Try to make a pen on the back of the mark so that the holes are one against one.Take a 150mm provoschennogo white cord and make a diagonal interweaving through one hole.Then do the same with the red cord, only in the opposite direction so that the crosses are obtained.With reverse moans, tails with laces are fastened by simple tying knots. The remaining tails are cut off.Next, you need to fold 2 white pieces of the letter" G "and make a hole holeAnd attach the riveting with the help of a press. Do the same thing on the second side to make the letter ”P”, only attach the red piece.You need 2 letters of such letters” P ”, only the second one should be symmetrical to the first.D Further, the piece created with the lacing piece must also be joined together with rivets with two letters "P".
The next step is to make 8 small holes on the pieces with dimensions 45x15mm. Try to make a pen on the back of the mark so that the holes are one against one.
Stylish plywood sofa (which you make in 1 day)
What are the capitals of the republics of the former USSR
People waking up on a spaceship do not remember who they were and what they did before
16 rules of etiquette that we break every single day