• Doll Box

    We need: 1. An empty plastic bottle 1.5-2 liters. 2. Doll (Barbie, Cindy upper torso). 3. 5 m tape width 4 cm. 4. 5 m lace. 5. Lining fabric 2 rectangles 15cm in height, length should be slightly larger than the diameter of the bottle. 6. Wadded disc 2pcs. 7. Pistol and glue. Empty the bottle cut off at 10 cm bottom, and 10 cm top. From the top half you need to cut the neck.
     cut a plastic bottle
    We take a cotton disc, we cut out a circle from a lining fabric of the same diameter. You need to arrange them together (you need to start a few lines, so that the squares turn out), so it will become a bit denser. The second cotton pad can be cut slightly, making it smaller in diameter and repeating the procedure.
     sew the stitch
    Next we take the cooked rectangle (lining fabric) and from the side that is longer, give a free line, so that you can pull it off. We shrink a line and make a tube of fabric in diameter with a cotton pad, sew.To make the bottom, we sew a 0,5mm roped circle around the line (where we tied the fabric). The same procedure should be carried out with another cotton disc that is smaller in diameter, this cylinder will be for the upper part of the box. We put our lining - cylinder into the bottom part of the bottle, carefully spread it and lay it on the outer side. With the help of hot glue, beautifully laid (small folds) you need to glue the lining to the bottle (outside). You also need to cut a piece of 5 cm from the tape and glue it to the edge of the lining (as in the photo), this will be the fittings. Do the same with the second half of the bottle.
     put our lining
    Now let's start making a dress. Tape and lace, stitch together with a free line on the edge and a little bit together (you need to make smooth folds). We take hot glue and we begin to glue the dress around the top with a pistol. We make a circle, cut it off, very carefully glue the joint. A little back down, do the next row. And so on until the end of the bottom half of the bottle.
     do the second half of the bottle
     let's start making the dress
    Getting to the top, you need to make our doll a dress. Here, using the ribbon, we make the bodice for every taste (in our case, fastening the ribbon over the cross). With the remnants of lace and ribbons you can make a hat. Having stretched the lace up to the limit, it is nice to lay the ribbon on top (put the hat to the head).
     let's start making the dress
     proceed to the manufacture of the dress
    Next to the top of the bottle you need to insert a doll and properly fix it there. Then take the lace with a ribbon and repeat the procedure for creating a dress. Begin to glue from top to bottom. After the upper part of the box dries, you need to connect the box by gluing to the top of that piece of tape, which we initially fixed on the bottom half.
    Casket doll
     Stash doll

    Related news

    Repair and hauling of upholstered furniture: main advantages
    How to make a face mask
    Care for Sensitive Skin
    How to connect WiFi router Asus
    How to delete audio recording in Contact
    How to solve the problem with calluses on the legs
    How to choose a kitchen